Universal Thermocouple (24")
Fits most Dyna-Glo wall heaters, cabinet heaters, and vent-free models. 24-inch lead with standard fitting.
Compatible Models
BF30NMDGBF20NMDGBF30PMDGIR18NMDG-1
Dyna-Glo Heater Replacement Parts
Find replacement parts for Dyna-Glo heaters — thermocouples, wicks, igniters, fan motors, and more. Whether your heater won't stay lit or needs a seasonal tune-up, we link to the right parts on Amazon.
All links go to Amazon.com. As an Amazon Associate we earn from qualifying purchases. Prices and availability are subject to change.
Thermocouples & Flame Sensors
The thermocouple is the most common failure point on Dyna-Glo wall and indoor kerosene heaters. If your heater lights but shuts off after a few seconds, the thermocouple likely needs replacing.
Find on Amazon
Thermocouple for Kerosene Heaters
Replacement thermocouple specifically designed for Dyna-Glo indoor convection kerosene heaters.
Compatible Models
WK24BKWK24WHRMC-55R7B
Oxygen Depletion Sensor (ODS) Pilot Assembly
Complete ODS pilot assembly with thermocouple — required safety component for vent-free heaters.
Find on AmazonWicks & Wick Replacements
Kerosene heater wicks wear down over time and need periodic replacement for efficient, clean-burning operation. Replace the wick when you notice reduced heat output, excessive smoke, or a strong kerosene smell.
Kerosene Heater Wick (Convection Models)
Factory-replacement wick for Dyna-Glo indoor convection kerosene heaters.
Compatible Models
WK24BKWK24WHWK95C8BWK95C8C
Kerosene Heater Wick (Radiant Models)
Replacement wick for Dyna-Glo radiant kerosene heaters.
Compatible Models
RMC-55R7BRMC-95C6B
Igniters & Ignition Parts
If your heater won't start or the igniter clicks without lighting, it's time for a replacement. These parts cover forced-air, wall, and kerosene heater ignition systems.
Piezo Igniter for Wall Heaters
Push-button piezo igniter replacement for Dyna-Glo blue flame and infrared wall heaters.
Find on AmazonForced-Air Heater Igniter Plug
Ceramic igniter plug for Dyna-Glo kerosene and propane forced-air construction heaters.
Compatible Models
KFA50DGDKFA80DGDKFA135DGDKFA210DGD
Kerosene Heater Igniter
Battery-operated igniter for Dyna-Glo portable and indoor kerosene heaters.
Find on AmazonForced-Air Heater Parts
Fuel filters, nozzles, fans, and photocells for Dyna-Glo kerosene and propane forced-air torpedo heaters used on construction sites and in garages.
Fuel Filter (3-pack)
Replacement inline fuel filters for kerosene forced-air heaters — change every season.
Compatible Models
KFA50DGDKFA80DGDKFA135DGDKFA210DGD
Fuel Nozzle
Replacement atomizing fuel nozzle for clean, efficient combustion.
Find on AmazonCombustion Fan Motor
Replacement fan motor for Dyna-Glo forced-air kerosene and propane heaters.
Find on AmazonPhotocell / Flame Sensor
Photocell (cad cell) that detects the flame — if your heater starts then shuts off after 15–30 seconds, this is a common cause.
Find on AmazonElectric Garage Heater Parts
Replacement heating elements, thermostats, and fan assemblies for Dyna-Glo electric garage and workshop heaters.
Heating Element (EG7500DH)
Replacement 240V heating element for the Dyna-Glo 7,500-watt electric garage heater.
Compatible Models
EG7500DHEG10000DH
Adjustable Thermostat
Built-in thermostat with temperature dial for Dyna-Glo electric garage heaters.
Find on AmazonFan Blade Assembly
Replacement fan blade and motor assembly for forced-air electric models.
Find on AmazonWall Heater Parts
Replacement parts for Dyna-Glo vent-free blue flame and infrared wall heaters — including gas valves, ceramic plaques, and mounting hardware.
Gas Control Valve
Replacement gas control valve with thermostat knob for Dyna-Glo wall-mounted heaters.
Compatible Models
BF30NMDGBF30PMDGBF20NMDG
Infrared Ceramic Plaque
Replacement ceramic emitter plaque for Dyna-Glo infrared wall heaters.
Compatible Models
IR18NMDG-1IR30NMDG-1
Wall Mounting Bracket Kit
Replacement mounting brackets and hardware for secure wall installation.
Find on AmazonHow to Find the Right Dyna-Glo Heater Replacement Part
Check your model number first. The model number is usually printed on a sticker or metal plate on the back, bottom, or inside of the firebox/cabinet. Knowing the exact model number ensures you order the correct part.
Consult the owner’s manual. Most manuals include an exploded parts diagram with part numbers. If you’ve lost your manual, search for “[model number] manual PDF” — many are available for free download.
When in doubt, measure. For cooking grates, heat plates, and glass panels, measure the length, width, and depth of the existing part before ordering. Even a half-inch difference can mean the wrong fit.
Replace worn parts before they fail. Cracked heat plates cause hot spots and flare-ups. Worn gaskets let heat escape. A failing thermocouple can shut your heater off mid-use. Regular inspection and replacement keeps your equipment safe and efficient.
Frequently Asked Questions
Where can I buy Dyna-Glo Heater replacement parts?
We link to replacement parts on Amazon.com, which carries a wide selection of both OEM and aftermarket parts. Amazon offers fast shipping (often free with Prime) and easy returns if a part doesn’t fit your model.
Are aftermarket parts compatible with Dyna-Glo Heater products?
Yes — many aftermarket parts are manufactured to the same specifications as OEM parts and fit correctly. Always double-check the model number compatibility listed in the product description on Amazon before purchasing. Aftermarket parts are often available at a lower price than OEM replacements.
How do I find my model number?
The model number is typically found on a metal rating plate or sticker. For grills, check inside the cart frame or on the back panel. For heaters, look on the back or bottom of the unit. For fireplace doors, check the packaging or the installation instructions. The model number usually starts with letters followed by numbers (e.g., DGP552CSP-D, BF30NMDG, etc.).