Dyna-Glo Delux KFA180DGD 140K or 180K BTU Kerosene Forced Air Heater

  • 140,000 or 180,000 BTU
  • Heats up to 4,200 sq.ft.
  • Dual Heat Technology
  • Comfort Control Thermostat
  • Built in Digital Diagnostics
  • Built-In Air Pressure Gauge
  • Run Time Fuel Gauge
  • Dual Source Power Cord
  • 10” Flat-free Wheels
  • Front & Rear Lift Handles & Cord Wrap
  • Flameout Sensor
  • Sturdy, Rugged Construction
  • Heater Operates 2 Heat Settings: Low & High
  • Fuel Capacity:  13 Gallons
  • Heating Hours: 10 or 12 Hours

SKU: KFA180DGD Category:

The Dyna-Glo Delux 140,000 BTU or 180,000 BTU Kerosene Forced Air Heater rapidly turns up the heat, in areas when and where you need it. This natural gas heater heats up to 4,200 square feet and runs 10 to 12 hours with a full 13-gallon tank.

When you need a quick and effective heating solution, whether you’re on a residential or commercial construction or wanting to use this heater for industrial and commercial applications, look no further than this Dyna-Glo Delux 140k or 180K BTU Kerosene Forced Air Heater. This heater operates on 1k kerosene, #1 diesel, #2 diesel, #1 fuel oil, #2 fuel oil, Jet-A, or JP-8. There’s a runtime fuel gauge which indicates how much time is left before refueling is needed to ensure you are prepared to finish the job.

The KFA180DGD Forced Air Heater has a comfort control thermostat to give precise temperature control for optimum fuel savings.

Quality Construction

The entire unit is made of quality materials to ensure longevity and safety. Dyna-Glo Deluxe Forced Air Heater is equipped with flat-free wheels to prevent downtime and large ergonomic handles for easy mobility. Conveniently on the power cord has a dual-port allowing for secondary items to be charged while the heater is operating.

Safety

Safety is ensured with integrated flameout sensor and an overheat auto shut-off valve and is CSA certified.

Dyna-Glo Delux KFA180DGD 140K or 180K BTU Kerosene Forced Air Heater

140,000 BTU or 180,000 BTU power

Switch between 140K BTU and 180K BTU with a flick of the switch.

Operates on 1k kerosene, #1 diesel, #2 diesel, #1 fuel oil, #2 fuel oil, Jet-A or JP-8

Dyna-Glo Delux KFA180DGD 140K or 180K BTU Kerosene Forced Air Heater - runtime

Run Time Indicator

Know how much run-time you have before refueling is required,

Dyna-Glo Delux KFA180DGD 140K or 180K BTU Kerosene Forced Air Heater - wheels

Portable

Flat-free wheels provide worry free portability

Dyna-Glo Delux KFA180DGD 140K or 180K BTU Kerosene Forced Air Heater - handle

Quality build

Large ergonomic handle provide easy mobility

Dyna-Glo Delux KFA180DGD 140K or 180K BTU Kerosene Forced Air Heater - high low switch

High Low switch

Flick of a switch to change between High and Low settings

Dyna-Glo Delux KFA180DGD 140K or 180K BTU Kerosene Forced Air Heater - thermostat

Thermostatic Control

Precise temperature control for fuel savings

Dyna-Glo Delux KFA180DGD 140K or 180K BTU Kerosene Forced Air Heater 1

Last update on 2021-05-11 / Affiliate links / Images from Amazon Product Advertising API

Weight58 lbs
Dimensions47.2 × 23.1 × 33.5 in
BTU

Fuel Type

,

Heating area (sq. ft.)

Thermostat

Run Time (hours)

Questions and answers of the customers

  1. 0 votes
    There are no answers for this question yet. Answer now
  2. 0 votes
    Answered by the admin

    Best to read Manual for full instructions on how to adjust

    PUMP PRESSURE ADJUSTMENT
    NOTE: If the pump pressure needs to be adjusted, make sure the heater is running on the HIGH BTU setting.
    - Push the BTU CONTROL Switch to HIGH (See Operation, page 8, KFA135DGD/180DGD/220DGD Models only)
    - Remove Pressure Gauge Plug from End Filter Cover. (KFA50DGD/80DGD Models only)
    - Start heater. Allow the r to reach full speed
    - Adjust pressure (Using a flat blade screwdriver) Turn relief valve to clockwise to increase pressure. Turn the relief valve to counterclockwise to decrease pressure.
    - Stop heater (See Operation, page 8)

Send me a notification for each new answer.
Scroll to Top